LizardSkin Ceramic Insulation For more information: visit LizardSkin.com or call 800.549.0042
x
LizardSkin Sound Control For more information: visit LizardSkin.com or call 800.549.0042
xLizardSkin Social Media Posts
We're still trying to figure out where to put LizardSkin on this truck.
Credit: Sculptor, Chris Miller: chrismillerstudio.com/
Our friends at @fentonspeedshop built this beautiful @vw van using LizardSkin on the underside, in the treasure chest and the motor bay followed by a base clear coat. Looks awesome!
Vehicle Spotlight: Brown Shuga (1971 C-10)
What a beauty! This classic truck, built by Rynobuilt Rod and Custom, is protected by LizardSkin-SC and LizardSkin-CI. Keep an eye out for it in Classic Truck Performance Magazine.
Sikk....
LizardSkin's Will Conner and Cody Watson were both recent guests on the Two Guys Garage Podcast. They offered some tips and tricks for using LizardSkin and talked a little bit about the history of the company. Also, Cody managed to get a new nickname. Give it a listen!
Check out LizardSkin's Will Conner on Sam's Garage as he highlights the benefits of our coatings and how they combat heat, noise, and protect your vehicle. Love this Hudson Hornet!
All of us at LizardSkin wish you a safe and happy 4th of July!
If you live in the Houston Metro Area, check out our friend Chris and Da Short Bus on Channel 13 this afternoon. Chris built an awesome hot rod bus that makes people question why it’s parked in a handicapped spot, and LizardSkin is proud to be a part of the build. For those not in Houston, check out his page - this bus is ridiculous!Short Bus and burnouts... All my Houston peeps news Channel 13 @abc13houston will be doing a segment on me and the purpose behind the Bus.
****
Short segment between 11-12 & full segment 4-5pm. Set your DVR or gather the family and watch it live. Huge Thanks to Ryan @gearswheelsandmotors for shooting footage and @lonestarthrowdown & @carshowz Make sure to give a like and follow.
I chose lizard skin for my 92 mustang that I completely restored and I’m coyote swapping to use as a nice weather driver and to enjoy some car shows with my dad. I stripped the floor to bare metal where needed. Applied a two part epoxy. Let that dry for a week. Used SEM one urethane seam sealer where needed. Let that dry for a few days. Then applied sound control. I came back the next day to see the SC was peeling off of the seam sealer. This seam sealer is paintable immediately or days later I use it all the time. I’m an automotive painter. So I peeled it off and applied a primer/sealer then applied the ceramic coating. I think it should be in the directions that you must prime/paint over new seam sealer. It even peeled on some of the sealer that was many months old. Other then that it seems to be good. I only used lizard skin on the inside. The outside underneath is a SEM two part Tex coat. Then painted to match factory overspray.
If you have to remove the old factory-installed sound deadening material from your project car before installing LizardSkin, it looks like there might be an easier way. We found this video and a few others that show you how! We sure love people's ingenuity...and dry ice.
That worked way better than I thought it would.
There is asbestos in the older undercoating. LAST thing you want to do is heat it and wire wheel it
Torches and a wire wheel, gets it off really well
That’s saved a lot of work
Great products, got off to a rough start when I misread the wet-mil gauge but the tech staff at LizardSkin got me back on track. Here are a few photos of my project, it’s a 1978 Datsun 280Z. I stripped to bare metal, completed necessary metal repairs, applied epoxy primer, 2 coats of LizardSkin Sound Control, 2 coats of LizardSkin Ceramic Insulation, then finished with base coat clear coat.
WOW!!! That is an amazing job, we don't think rust is ever going to be a problem for that Datsun. Glad we could help out on the wet mil gauge. Thanks for being a customer, we can't wait to see the end result.
What a great video from Jake's Shop! This perfectly highlights a first-time application and shows that we truly are a DIY solution. LizardSkin’s automotive insulation and sound deadening products are popular additions to classic cars like this 1968 Camaro.
Nice work, Jake!
Great product and I wouldn’t use anything else ! Building my 72 Datsun 510 race car now and the ceramic is at the shop ready to spray !
Leroy Dabney
Vehicle Spotlight: Tinmama
"I used over 20 gallons of your product and about 16 cans of topcoat on this car. Every surface that isnt painted green or semi gloss black, is coated with LizardSkin.” — Luke from Tinman II Kustoms.
What a beautiful ride, Luke! Congrats on finshing in the Top 12 in the Battle of the Builders at the 2019 SEMA show. For more information on the products used, click here: lizardskin.com/spray-on-car-insulation/
Thanks for the love guys! :)
As a company that proudly manufactures our products in the USA, we are thrilled to see crew launches once again take off from American soil. Congratulations to both SpaceX and NASA - National Aeronautics and Space Administration on a successful launch. We'll be looking forward to a successful dock in 18 hours. #madeintheusa #LaunchAmerica
Here at LizardSkin, we hope everyone had a safe and happy Memorial Day while remembering and honoring those who made the ultimate sacrifice.
Jeeps new and old are implementing LizardSkin's coatings for sound deadening and reducing heat transfer. Check out the video below from TrailRecon and learn how we are making jeeps (and many other types of vehicles) cooler and quieter.
Nick Bova
Claudia Williams
How much?